FAA UPN Tracker

Home › Guides › Receiving-inspection checklist

Guide 3 of 3

Receiving-inspection checklist for aircraft parts

Every incoming part should pass these checks before it reaches a serviceable shelf. Anything that fails goes to quarantine and Guide 2, not back into stock.

The list follows the FAA's AC 20-154A and AC 21-29D.

1. Packaging

  • The packaging names the supplier and shows no damage, tampering or repacking.
  • The quantity matches the packing slip, and plugs, caps and protective devices are in place.

2. Paperwork

  • Part, model and serial numbers match across the purchase order, packing slip, invoice and release document.
  • A document traces the part to an approved source: an FAA Form 8130-3, an EASA Form 1 accepted under a bilateral agreement, the manufacturer's shipping papers, or a maintenance release for a used part.
  • On an FAA Form 8130-3, the left side is signed for new parts and names the manufacturer. The right side is signed for return to service and carries the approval reference.
  • Standard parts and raw materials come with a certificate of conformity to the named specification.
  • Anything sold “as is” is treated as unserviceable until its conformity is shown.

3. The part itself

  • Its markings match the paperwork: part number, serial number, manufacturer marks, and lot or batch numbers. PMA parts are marked “FAA-PMA”.
  • It shows no tampering or hidden use: re-stamped numbers, new paint over old, corrosion, pitting, missing plating, or an odd finish, size or color.

4. Life and status

  • A life-limited part has records of its part number, serial number and remaining life in hours, cycles or calendar time, plus the mark, tag or record 14 CFR 43.10 requires.
  • Shelf-life items such as sealants, epoxies and prepregs are within date.
  • Applicable airworthiness directives and service bulletins are accounted for, and the part fits the aircraft it is meant for.

5. Published notices

  • The part number, and serial number if any, has been checked against FAA UPNs and EASA's SUP list. The FAA also advises reviewing your inventory and suppliers whenever it issues SUP reports.

6. Decision

  • Pass: move it to serviceable stock with its paperwork, in its original packaging where possible.
  • Doubt: segregate it from serviceable stock until its status is settled, then follow Guide 2.

Make step 5 a 30-second job. The free check searches FAA and EASA notices at once, and the FAA UPN Tracker app screens a whole inventory spreadsheet in one pass.

Check a part free

← All guides

Sources

FAA UPN Tracker is not affiliated with, endorsed by, or operated by the FAA or EASA. Always verify safety information at the source.